What are the Installation Requirements for windows server 2016

  • A dedicated Thru-Hull Inlet fitting and a Sea Cock Valve.
  • An over board Thru-Hull Discharge fitting.
  • A Product Water Tank Fill line connection.
  • An Electrical Circuit Breaker and Electrical Wiring.

Where on the boat can it be installed?

  • Anywhere. The typical choice is the engine room, but lazeretts, closets, under settees, or any other available space is acceptable.

What size thru-hull is required

  • From ½” to 1” depending on the watermaker.

Can I have an above water line installation?

  • Yes. The watermaker may be above water level, however the Booster Pump (supplied with the watermaker) should be below water line.

Is a self (owner) installation recommended?

  • Installing the necessary thru-hull fittings and electrical service should be performed by qualified and experienced technicians. Installation of the watermaker itself requires basic mechanical experience and may be performed by the user. Our comprehensive Owners Manual takes the installer through the process step-by-step.

SHOPToken

20

0

Launching our new E-Store

mastervolt-banner-grey

We have carefully selected a range of parts you'll need to keep your Power Solutions, Generators, Air conditioners and Watermakers running at optimal performance.

Visit Store